All About Fibre Optic Cables
For a business today to maintain competitiveness in the market, it must fully take advantage of telecommunications. Fibre optic networks bring about effective and reliable telecommunication. Fibre optic cables are important in enhancing telecommunications since they transfer data signals.Thin glass or plastic fibre is used for this.There are two main types of fibre optic cables which are multimode and single mode models. Multimode models are basically used for large telecommunication networks and local area networks. For cable television and telephony, single mode models are used.
There are a variety of benefits you get to reap from choosing fibre optic cables.First of all, fibre optic cables are much cheaper than other cables. Fibre optic cables also have a higher carrying capacity. This is because these fibres are much thinner and can therefore be bundled up together. A lot of telephone lines can be crossed over the same cable line because of this.Fibre optic cables do not have high chances of degradation.
Loss of signal is a non-occurrence when using fibre optic cables. If you are looking for speed, then fibre optic cables are the way to go. They carry signals for relatively long distances. These cables are not affected by temperature changes, moisture, severe weather conditions and electromagnetic interference and are therefore very reliable.Because they are thinner and studier as compared to their copper counterparts, they are less prone to breakage.
Having all this in mind, purchasing fibre optic cables is the inarguably much wiser choice. For maximum benefit, there are a couple of things you ought to take into consideration when buying these cables.
Type should be taken into consideration when purchasing fibre optic cables. Multimode models are suitable for short distances and are therefore installed within buildings. The single mode on the other hand transmits data over long distances and is therefore majorly used in cable transmission and telephony. The cable’s diameter and construction must also be taken into account. It is important to seek help from a professional when choosing them for maximum performance.
During installation, one needs to ensure that minimum bend radius is maintained. Minimum bend radius is important so as to reduce chances of attenuation and broken fibres.The cable’s maximum tensile rating must also not be exceeded. It is important that you use just one model of fibre cables because both models cannot work together. Nothing is a hundred percent proof and breakages may at times occur with fibre optic cables but this can be fixed either by using optical gel which helps in light transfer or simply fuse the cables together using heat.This is not something you can do all by yourself and therefore you should contract help from an experienced professional.